(720) 840 - 2535 info@ultrHA.com

 Set your thermostat to snugtastic!

 

 

Ecobee’s motion controlled temperature sensors make every room  PERFECT.

 

 

Ecobee3

Ecobee3 comes with sensors for every room. Heat can be set to come on if motion is detected. This saves money on energy costs because your not heating empty rooms.

The Ecobee3 can be controlled from anywhere, and the remote sensors control the temperature of multiple rooms in your house. See that sensor on the side? That remote wireless sensor that measures the temperature and communicates back to the base unit, telling it when it’s hot or cold enough based on your settings.

Square with rounded corners, the face of the 3.9 x 3.9-inch Ecobee is glossy black plastic, with a 3.5-inch QVGA touch screen in the middle. In the lower left corner, a small wedge-shaped section conceals a motion sensor.

The Ecobee comes with one wireless sensor, which is powered by a CR2032 coin-cell battery; the company says it should last about 4 years. When the battery runs low, you’ll receive an alert. The Ecobee can support up to 32 wireless sensors  The sensors have a range of 45 feet.

The Nest thermostat adapts to your life.

No need to program. Save energy effortlessly.

 

 

 

 

Nest Learning Thermostat Gen3

The Nest Learning Thermostat works with 95% of 24V heating and cooling systems, including gas, electric, forced air, heat pump, radiant, oil, hot water, solar and geothermal.

The Nest will guide you through a series of simple questions about your home, what temperatures you like, and your heating and cooling system. Nest will use this information to help keep you comfortable and help save you energy.

If it’s connected to Wi-Fi your Nest Thermostat will try to guess your location. If it’s not correct you can enter your location. Nest uses your location to update the date and time and get local weather information.  Nest works off of that information to keep you cozy.

Auto-schedule means you turn it up or down. Nest learns the temperatures you like and then programs itself. Auto-away means Nest adjusts the temperature after you leave so you don’t heat or cool your home when nobody is there.

You also have the option to look at your energy history. You can make adjustments if necessary based on this valuable information. If you see the Nest Leaf you know your are saving energy. In an independent study, Nest saved people an average of 10 to 12 percent on heating and 15 percent on cooling. Early-On is the feature of Nest that learns your home, and keeps an eye on the weather to give you optimal performance in a climate made just to fit your needs.

Nest now has a ring to fit any home’s style. Choose copper to add a warm touch. Stainless steel is perfect for a classic, versatile look. There are also black and white options available.

Z-Wave Smart Switch 6

Perfect for renters! Or, anyone who wants the flexibility of moving a lamp to the other side of the room. You are the master of control wherever you move this switch.

Instantly add Z-Wave control to any plug-in device, monitor its energy consumption, and simultaneously charge a USB device with the Aeon Labs Aeotec Z-Wave Smart Switch 6 (Gen5). Featuring Z-Wave Plus certification, the Smart Switch 6 is compatible with a wide range of Z-Wave controllers. Simply plug a device into the switch’s outlet, and plug the switch into a standard power outlet. You can then control the device with a compatible Z-Wave controller.

In addition to enabling Z-Wave communication, the Z-Wave Smart Switch monitors the plugged in device’s wattage consumption and kWh energy usage. Energy consumption will be displayed in the user interface of your Z-Wave gateway/controller (if supported).

The multicolor LED ring surrounding the outlet also reflects energy usage (can be optionally disabled). Configure the ring either to reflect whether the plugged in device is On or Off, or set it up to reflect the amount of energy being consumed (e.g. Blue at 400W, Orange at 1900W, Red at 2400W).

Save on what you spend.

Smart Switch 6 has world-class energy monitoring technology built right in. In real-time it can understand how much electricity your devices are using and let you know.

It does that via the Aeotec LED Ring. 16 million colours of light are used to visually communicate how much electricity is being used.

400W 1900W 2400W

 

No colors.

A fan of the dark? Smart Switch 6’s LED Ring can be configured to be permanently turned off. Let there be no light.

2 colors.

The Aeotec LED ring can be reconfigured into a simple 2 color mode: blue when your device is on, white when it’s off.

16 million colors.

The Aeotec LED Ring is powered by 16 million different colors. That’s 16 million ways for us to help you cut down on how much you’re spending.

Smart Powerstrip

The Aeon labs smart powerstrip is a high-quality Z-Wave power board which can report immediate wattage consumption or kWh energy usage over a period of time. The powerstrip can be controlled by other Z-Wave devices to turn on/off 4 power outlets in 2 separate Groups to save electricity when appropriate. Two of the boards 6 power outlets remain constantly powered unless the whole board is powered down.

Low-cost Z-Wave energy meter and on/off capability in power strip. Four switchable power outlets in 2 Groups and 2 constant-power outlets. Energy readings accurate to ±1%

GE Z-Wave Wireless Lighting Control Outdoor Module

The outdoor switch enables you to wirelessly control your home’s outdoor lighting and appliances, including seasonal and landscape lighting, fountains and holiday decor, letting you turn lights on and off or schedule a timed event from anywhere.

Features one Z-Wave enabled outlet with integrated outlet cover that protects module from dirt and debris when not in use. Weather and impact resistant housing withstands  wet conditions.

Easily control outdoor lighting with your mobile device or computer using any Z-Wave certified gateway, or control lighting on location with the manual push-button control or a Z-Wave certified remote.

Compatable with the following Z-Wave certified Hubs: SmartThings, Pulse, Trane, Wink, Nexia, Honeywell, HomeSeer, Smart Security, Harmony, Vera, Connect and Iris. It works with Alexa for voice control, but one of the above hub are required.

Z-Wave Heavy Duty Smart Energy Appliance Switch

Know how much energy you’re using, and turn off those large appliance energy vampires from anywhere at anytime. This switch is ideal for the washer and dryer. Really any large appliance you want more energy control over.

 

Remotely control a heavy-duty wired device and save energy with the Aeon Labs Aeotec Z-Wave Heavy Duty Smart Energy Appliance Switch. Once your wired device is connected to this appliance switch, you can turn it on/off with a Z-Wave remote. The switch can also report energy usage in Watts or KWh to a Z-Wave controller. Energy consumption will be displayed at the controller’s user interface.

 

 

 

Z-Wave Smart Energy Switch

The Aeon Labs Smart Energy Switch is a low-cost Z-Wave appliance switch which can report immediate wattage energy usage or kWh energy usage over a period of time. The switch plugs into a standard power outlet, and your appliance plugs into the switch. Installation is that simple. Now you can use a Z-Wave controller to turn the appliance on/off from 100 feet away.

In addition to Z-Wave technology, the Z-Wave Smart Energy Plug-In Appliance Switch also features an integrated energy meter to help you manage your energy consumption and reduce costs. It can report immediate wattage consumption or kWh energy usage over a period of time. Energy consumption will be displayed in the user interface of the gateway/controller (if supported).

For even more energy savings, put the switch on a timer using a compatible Z-Wave timer or software (sold separately). The switch receives wireless Z-Wave commands up to 100 feet away, repeats Z-Wave commands to other devices, and supports Z-Wave Explorer Frames. It can also be controlled by other Z-Wave devices to turn on/off to save electricity when appropriate. With an unobtrusive small form factor, the Aeon Labs Smart Energy Switch will not block other nearby A/C outlets.

 

Reduce your carbon footprint with smart home technology.

Set your thermostat to snugtastic!

 

Ecobee3

Ecobee3 comes with sensors for every room. Heat can be set to come on if motion is detected. This saves money on energy costs because your not heating empty rooms.

The Ecobee3 can be controlled from anywhere, and the remote sensors control the temperature of multiple rooms in your house. See that sensor on the side? That remote wireless sensor that measures the temperature and communicates back to the base unit, telling it when it’s hot or cold enough based on your settings.

Square with rounded corners, the face of the 3.9 x 3.9-inch Ecobee is glossy black plastic, with a 3.5-inch QVGA touch screen in the middle. In the lower left corner, a small wedge-shaped section conceals a motion sensor.

The Ecobee comes with one wireless sensor, which is powered by a CR2032 coin-cell battery; the company says it should last about 4 years. When the battery runs low, you’ll receive an alert. The Ecobee can support up to 32 wireless sensors  The sensors have a range of 45 feet.

 

The Nest thermostat adapts to your life.

No need to program. Save energy effortlessly.

 

Nest Learning Thermostat Gen3

The Nest Learning Thermostat works with 95% of 24V heating and cooling systems, including gas, electric, forced air, heat pump, radiant, oil, hot water, solar and geothermal.

The Nest will guide you through a series of simple questions about your home, what temperatures you like, and your heating and cooling system. Nest will use this information to help keep you comfortable and help save you energy.

If it’s connected to Wi-Fi your Nest Thermostat will try to guess your location. If it’s not correct you can enter your location. Nest uses your location to update the date and time and get local weather information.  Nest works off of that information to keep you cozy.

Auto-schedule means you turn it up or down. Nest learns the temperatures you like and then programs itself. Auto-away means Nest adjusts the temperature after you leave so you don’t heat or cool your home when nobody is there.

You also have the option to look at your energy history. You can make adjustments if necessary based on this valuable information. If you see the Nest Leaf you know your are saving energy. In an independent study, Nest saved people an average of 10 to 12 percent on heating and 15 percent on cooling. Early-On is the feature of Nest that learns your home, and keeps an eye on the weather to give you optimal performance in a climate made just to fit your needs.

Nest now has a ring to fit any home’s style. Choose copper to add a warm touch. Stainless steel is perfect for a classic, versatile look. There are also black and white options available.

Z-Wave Smart Switch 6

Perfect for renters! Or, anyone who wants the flexibility of moving a lamp to the other side of the room. You are the master of control wherever you move this switch.

Instantly add Z-Wave control to any plug-in device, monitor its energy consumption, and simultaneously charge a USB device with the Aeon Labs Aeotec Z-Wave Smart Switch 6 (Gen5). Featuring Z-Wave Plus certification, the Smart Switch 6 is compatible with a wide range of Z-Wave controllers. Simply plug a device into the switch’s outlet, and plug the switch into a standard power outlet. You can then control the device with a compatible Z-Wave controller.

In addition to enabling Z-Wave communication, the Z-Wave Smart Switch monitors the plugged in device’s wattage consumption and kWh energy usage. Energy consumption will be displayed in the user interface of your Z-Wave gateway/controller (if supported).

The multicolor LED ring surrounding the outlet also reflects energy usage (can be optionally disabled). Configure the ring either to reflect whether the plugged in device is On or Off, or set it up to reflect the amount of energy being consumed (e.g. Blue at 400W, Orange at 1900W, Red at 2400W).

GE Z-Wave Wireless Lighting Control Outdoor Module

The outdoor switch enables you to wirelessly control your home’s outdoor lighting and appliances, including seasonal and landscape lighting, fountains and holiday decor, letting you turn lights on and off or schedule a timed event from anywhere.

Features one Z-Wave enabled outlet with integrated outlet cover that protects module from dirt and debris when not in use. Weather and impact resistant housing withstands  wet conditions.

Easily control outdoor lighting with your mobile device or computer using any Z-Wave certified gateway, or control lighting on location with the manual push-button control or a Z-Wave certified remote.

Compatable with the following Z-Wave certified Hubs: SmartThings, Pulse, Trane, Wink, Nexia, Honeywell, HomeSeer, Smart Security, Harmony, Vera, Connect and Iris. It works with Alexa for voice control, but one of the above hub are required.

Z-Wave Heavy Duty Smart Energy Appliance Switch

Know how much energy you’re using, and turn off those large appliance energy vampires from anywhere at anytime. This switch is ideal for the washer and dryer. Really any large appliance you want more energy control over.

Remotely control a heavy-duty wired device and save energy with the Aeon Labs Aeotec Z-Wave Heavy Duty Smart Energy Appliance Switch. Once your wired device is connected to this appliance switch, you can turn it on/off with a Z-Wave remote. The switch can also report energy usage in Watts or KWh to a Z-Wave controller. Energy consumption will be displayed at the controller’s user interface.

 

 

 

Reduce your carbon footprint

ultrHA LLC

We guarantee you will love home automation as much as we do!

© 2023 ultrHA LLC

Pin It on Pinterest

Share This